ProForm PFTL71505.3 User Manual page 7

2. Attach a Wheel (66) to the base of the Uprights (69) with
a Wheel Bolt (64) and a Nut (13) as shown. Do not
overtighten the Wheel Bolt; the Wheel should turn
freely.
With the help of a second person, carefully tip the tread-
mill onto its other side. See assembly step 1, and attach
the other Extension Leg (63) and the remaining two
Base Pads (57). Then, attach the other Wheel (66) as
described above.
With the help of a second person, carefully tip the tread-
mill down so the Uprights (69) are in a vertical position.
3. Attach the Left Upper Body Arm (109) to the left Upright
(69) with two 3 1/2" Bolts (111), two Washers (52), and
two Star Washers (88) as shown.
Attach the Right Upper Body Arm (not shown) to the right
Upright (not shown) in the same way.
4. Insert the tab on one of the Handrail Brackets (21) into the
slot in the right Upright (69). Attach the Handrail Bracket
with a 3/4" Screw (2) and a Small Star Washer (24).
Attach the other Handrail Bracket to the left Upright
(not shown) in the same way.
2
3
52
111
4
24
2
7
64
69
109
69
88
88
69
Slot
21
66
13