Table of Contents
Advertisement
Arming
■
To arm, press
the parking lights will flash once.
Arming while driving
■
To arm the system while driving, press
is running. The system will chirp once and then once more to indicate that
the ignition is on.
Disarming
■
To disarm, press
flash twice.
High security disarm
■
For high security disarm, press
sounding. To completely disarm the security system, press again and the
system will chirp 4 or 5 times (reporting the trigger).
Disarming without a remote
■
Turn on the ignition. Press the Valet
should now disarm. If it does not, you may have waited too long, so turn the
ignition off and on and try again.
™
Silent Mode
■
Pressing
(or
disarming will eliminate the confirmation chirp(s) for that one operation
only.
Panic Mode
■
Press
for 2 seconds, and you will enter Panic Mode. The siren will sound
and the parking lights will flash for 30 seconds. To stop Panic Mode at any
time, press
To remote start the vehicle
■
Press
twice within 3 seconds. The parking lights will turn on (if
connected) and the vehicle will start and run for the programmed period of
time.
To disable the remote start system
■
To disable the remote start, move the shutdown toggle switch to the OFF
position.
Location of Valet
© 2004 directed electronics, inc.
QUICK REFERENCE GUIDE
. When the system arms, you will hear a short chirp, and
. You will hear two chirps, and the parking lights will
on your remote and the siren will stop
button within 15 seconds. The system
®
on the 4-button remote) briefly before arming or
on the remote again.
®
switch_________________________________
on your remote while the vehicle
53
Hide quick links:
Advertisement
Table of Contents
