Lcd 2-Way Remote Standard Configuration - Avital AVISTART 4400 Owner's Manual

r r e e m m o o t t e e f f u u n n c c t t i i o o n n s s
The remote buttons are used to send commands to the system.
The descriptions below reflect the standard configuration for this
system. The buttons can be custom configured for the user's
specific needs by the installer.
➜

LCD 2-way remote standard configuration

LCD 2-way button configuration
Button
The System Arm/Lock and Multi-Level Security Arming func-
tions are controlled by pressing this button.
Button
The System Disarm/Unlock and High Security Disarm functions
are controlled by pressing this button.
Button
Channel 2 output is controlled by pressing and holding this
button for two seconds.
Button
The panic feature is controlled by pressing and holding this
button for three seconds. Press again to disable panic mode.
Button
The LCD backlighting will turn on when pressed for less than one
second; when held for more than five seconds the transceiver will
enter adjustment mode allowing the setting of the clock, timer
mode, and audible melody selection. For more information, please
refer to the Function Button Configurations section of this guide.
10
© 2004 directed electronics, inc.