Setting Up - ClearSounds CSC600ER User Manual

CALLER ID ON CALL WAITING
When you subscribe to Caller ID/Call Waiting service from
your local telephone company and you activate the call
waiting function, the telephone will display the name and
number of the second caller while you are having a
conversation.
Caller ID info displayed
Caller 1
436-1234
1. When you are on the line, the telephone will display the
name and number of the second caller.
2. Press the CALL WAITING button to answer the second caller.
3. When you have finished, press the
continue with your conversation with the first caller.
Caller two's information
is displayed
Caller 1
4
Caller 2
291-5678
CALL WAITING button to
22

SETTING UP

CHECK THE CONTENTS OF THE BOX
Box should contain:
l Handset with handset cord and phone base
l Telephone line cord
l 4 AAA size 1.5V batteries
l User's manual
l Adapter
BATTERY AND ADAPTER INSTALLATION
A. The Caller ID phone requires four 1.5V AAA size batteries for LCD
display.
1. Remove the battery cover from the back of your Caller ID phone.
2. Insert four 1.5V AAA size batteries by observing the +/- polarity
marked on the compartment.
3. Replace battery compartment cover.
NOTES :
1. Do not recharge the batteries or dispose them in fire.
2. Do not throw the battery everywhere, in case cause the
pollution.
B. You can also insert the adapter for the LCD display, and you must
insert the adapter for LCD back light and other special functions,
please refer to the concrete requirement in the manual.
CONNECTING LINE CORDS
1. Plug one end of the supplied modular cord into the line jack. Then
plug the other end into telephone line jack.
2. Insert the earphone plug into the 2.5mm standard
3.5mm standard NECKLOOP socket.
3. Insert the end of the shaker line into the
socket or the
socket.
3