Operating The G Track - Samson G Track Owner's Manual

Operating the G Track

Selecting the Inputs
The G Track has two input modes;
INST/MIC and STEREO, allowing
you to connect and record a variety
of different input signals and
configurations.
INST/MIC
The INST/MIC mode lets you record
the microphone along with a mono
line input, like an electric guitar,
bass or mono keyboard. Select the
INST/MIC mode when you want to
use the microphone alone or the
microphone with another line input.
In this mode, the microphone is on
the left channel and the line in is on
the right channel. When using the
INST/MIC mode you'll need to set-up
one or two mono tracks for recording
in your DAW. Then, select USB Audio
Codec - mono left for the microphone
track and USB Audio Codec - mono
right for the instrument connected to
the line input.
Stereo Mode
Switch the input mode to Stereo
for recording stereo line inputs like
keyboards, drum machines, MP3
players or even a DJ mixer. When
using the INST/MIC mode you'll need
to set-up a stereo track for recording
in your DAW. Then, select USB Audio
Codec stereo for the line input.
Note: You can also record two mono
signals in STEREO mode. See the
following section, Recording in Dual
Mono Mode.
9