For Service Technicians - Panasonic BB-HCM580A Service Manual

BB-HCM580A
1.2.1. Suggested PbF Solder
There are several types of PbF solder available commercially. While this product is manufactured using Tin, Silver, and Copper,
(Sn+Ag+Cu), you can also use Tin and Copper, (Sn+Cu), or Tin, Zinc, and Bismuth, (Sn+Zn+Bi). Please check the manufacturer's
specific instructions for the melting points of their products and any precautions for using their product with other materials. The fol-
lowing lead free (PbF) solder wire gauge are recommended for service of this product: 0.3mm, 0.6mm and 1.0mm.
1.3.

For Service Technicians

ICs and LSIs are vulnerable to static electricity.
When replacing, the following precautions will help to prevent recurring malfunctions.
1. Cover the plastic parts with aluminum foil.
2. Ground the soldering irons.
3. Use a conductive mat on the work-table.
4. Do not grasp IC or LSI pins with bare fingers.
1.4. Trademarks
• Adobe and Acrobat are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or
other countries.
• Ethernet is a registered trademark of Xerox Corporation in the United States and/or other countries.
• Microsoft, Windows and Active X are either registered trademarks or trademarks of Microsoft Corporation in the United States
and/or other countries.
• Pentium is a registered trademark of Intel Corporation or its subsidiaries in the United States and other countries.
• Screen shots reprinted with permission from Microsoft Corporation.
All other trademarks identified herein are the property of their respective owners.
4