Download Print this page

Panasonic BB-HCM581A Operating Manual

Power over ethernet (poe) zoom mpeg-4 network camera
Hide thumbs Also See for BB-HCM581A:

Advertisement

Quick Links

Installation Guide

Network Camera
BB-HCM580A
Model No.
BB-HCM581A
This manual is written for both the BB-HCM580A (AC Adaptor Type) and the BB-HCM581A (PoE Ready). Available features and operations vary slightly
depending on the model. You can confirm the model no. of your camera by checking the model no. printed on the front of the camera.
Please read the included Important Information before proceeding.
Complete Operating Instructions and all other documentation can be found on the included CD-ROM.
• This document (Installation Guide) explains how to physically connect the
camera to the power supply and network, as well how to mount or place the
camera for regular use.
• The Setup Guide describes how to set up the camera so that it can be
accessed using a PC.
Abbreviations
• UPnP is the abbreviation for "Universal Plug and Play".
• The Network Camera is referred to as "the camera" in this document.
Installation Procedure Overview
The following is an overview of the steps required to install and setup the camera. All steps are explained in this document unless otherwise noted.
Preparation
Camera Diagram
Confirm that you have all the
Make sure you know the
items required for
names of the camera's
installation.
physical features.
Preparation
1.
Confirm the following items are included in the camera's packaging.
• Additional pieces can be ordered by calling 1-800-332-5368.
Main Unit (1 pc.)
Screw A (2 pcs.)
Order No. XYN3+J6FJ
Used to secure ceiling plate A to
ceiling plate B.
Ceiling Mounting Cover (1 pc.)
Order No. PSKL1023Y2
Used when mounting the camera
on a ceiling.
AC Adaptor (1 pc.)
[BB-HCM580A Only]
Order No. PQLV202U
Cord Length: About 3 m
(9 feet 10 inches)
Safety Wire (1 pc.)
Order No. PQME10080Z
Used to secure the camera when
mounting it.
2.
You will need the following additional items to install and configure the camera.
– a PC (see the system requirements in the Important Information document)
– a router
Option for BB-HCM581A
You can also connect the camera using the optional Panasonic BB-HCA3A AC Adaptor. The BB-HCA3A includes the following items.
AC Adaptor (1 pc.)
Cord Length: About 3 m (9 feet 10 inches)
© 2007 Panasonic Communications Co., Ltd. All Rights Reserved.
PQQX15933YA KK0207CM1107
Indoor Use Only
(AC Adaptor Type)
(PoE Ready)
Connections
Connecting the camera to
your network and to the power
outlet.
Please read this document before using the product, and save this document for future
reference. Panasonic Network Camera Website: http://www.panasonic.com/netcam
for customers in the USA and Puerto Rico
• Refer to the Operating Instructions on the CD-ROM for details regarding
the camera's features.
• Refer to the Troubleshooting Guide on the CD-ROM if you have any
problems configuring or using the camera.
• The Setup CD-ROM is referred to as "the CD-ROM" in this document.
Setup
Setting up the camera (described in the included
Setup Guide). This involves configuring the camera
so that it can be accessed from a PC.
Washer S (1 pc.)
Order No. XWG26D12VW
Used when securing the safety
wire to the camera.
Screw B (5 pcs.)
Order No. XTB4+20AFJ
Used to secure ceiling plate B (4
pcs.) and the safety wire (1 pc.) to
the ceiling.
Ceiling Plate A (1 pc.)
Order No. PQZMHCM581A
Used to secure the camera to
ceiling plate B.
AC Cord (1 pc.)
[BB-HCM580A Only]
Order No. PSJA1069Z
Cord Length: About 1.8 m
(5 feet 11 inches)
Important Information (1 pc.)
Installation Guide
(this document) (1 pc.)
Setup Guide (1 pc.)
– a LAN cable (CAT-5 straight cable)
AC Cord (1 pc.)
Cord Length: About 1.8 m (5 feet 11 inches)
Mounting
Mounting or placing the
camera.
Washer L (1 pc.)
Order No. XWG4F16VW
Used when securing the safety
wire to the ceiling.
Screw C (1 pc.)
Order No. PQHV2610PJ65
Used for connecting the safety
wire to the camera.
Ceiling Plate B (1 pc.)
Order No. PQMD10110Z
Used to secure the camera to the
ceiling.
Audio/Video Cord (1 pc.)
[BB-HCM581A Only]
Order No. PSJA1103Y
Setup CD-ROM (1 pc.)
Order No. PQQX15704XCD
Contains the Setup Program needed to
configure the camera, as well as the
camera's documentation.*
*See the included Important Information
for a description of each document.
1

Advertisement

loading

Summary of Contents for Panasonic BB-HCM581A

  • Page 1: Installation Guide

    – a PC (see the system requirements in the Important Information document) – a router Option for BB-HCM581A You can also connect the camera using the optional Panasonic BB-HCA3A AC Adaptor. The BB-HCA3A includes the following items. AC Adaptor (1 pc.) Cord Length: About 3 m (9 feet 10 inches) ©...
  • Page 2 Before proceeding, confirm that your PC is connected to your router and can access the Internet. Also confirm that your router’s UPnP routers have UPnP ™ turned off by default.) Refer to the operating instructions included with your router or to the Panasonic Network Camera website (http://panasonic.co.jp/pcc/products/en/netwkcam/) for more information. When connecting the camera using the AC Adaptor Follow these instructions when connecting a BB-HCM580A, or when connecting a BB-HCM581A using the optional BB-HCA3A AC Adaptor.
  • Page 3 Read the following information after setting up the camera according to the procedure described in the Setup Guide. Connecting External Sensors The camera’s external I/O interface allows you to connect 2 devices (such as sensors, motion detectors, etc.) that can be used to trigger the camera’s image buffering and transferring features (see Section 2 Using Triggers to Buffer and Transfer Images in the Operating Instructions on the CD-ROM).
  • Page 4 Important Information Regarding Camera Mounting The camera can be mounted on a ceiling or table. Please read the following information before mounting the camera. Consult an authorized dealer for mounting. Caution • Make sure you attach the safety wire when mounting the camera on a ceiling to prevent the camera from falling.

This manual is also suitable for:

Bb-hcm580aBb-hcm581a-w - 21x optical zoom poe pan/tilt network camera