Status
Network Status
<edit TITLE>
Field
Designated Cost
CDP Neighbor
Use the CDP Neighbors page to view status information about neighboring
devices that were discovered by the Cisco Discovery Protocol (if enabled). This
information may be useful for troubleshooting.
The information on this page is automatically refreshed at 15-second intervals. If
CDP is disabled, a message appears at the top of the page and the list is empty. To
enable CDP, see
CDP Discovery, page
Field
Device ID
Local Port
Duration
Function
Platform
Interface ID
IP Address
Duplex
Voice VLAN
Description
The path cost to the designated bridge of the LAN
segment.
382.
Description
The host name of the neighboring device.
The outgoing port that the security appliance is using
for this connection.
The time interval (in seconds) that the security
appliance will keep CDP information from a
neighboring device.
The neighbor's device type: R - Router, T - Trans
Bridge, B - Source Route Bridge, S - Switch, H - Host,
I - IGMP, or r - repeater.
The model number of the neighboring device.
The interface that the neighboring device is using for
the connection.
The IP address of the neighboring device.
The duplex mode of the connection.
The Voice VLAN ID of the neighboring device.
3
97