Using The Device Cradle - Pioneer AVIC-F500BT Hardware User Manual

Using the Device Cradle

NOTE:
Depending upon the specific model available in your country/region, the device cradle
supplied with your device may not look exactly the same as the picture shown.
If the windshield of your vehicle is tinted with a reflective coating, an external antenna
(optional) may be needed to route the antenna to the top of the car through a window.
Don't leave the device in the place where it gets direct rays of the sun.
Mounting on the Windshield
Attach the device to the device
cradle (1a). Then slide the cradle
into the adapter end of the suction
mount (1b) and lock into place by
pressing down. Lastly, attach the
suction side of the suction mount
to your windshield, and lock by
pressing the lever toward the
suction cup (1c).
Mounting on the Dashboard
Attach the device to the device
cradle and the adapter end of the
suction mount as described above
(1a and 1b). Stick the Dash
Mounting Plate onto your
dashboard (2a), and attach the
suction side of the suction mount
to the plate (2b).
9