Yamaha YZF-R25 Service Manual page 94

7. Thermostat cover
8. Radiator inlet hose
9. Radiator
A. Insert the end of the coolant reservoir
breather hose into the frame pipe. Make sure
that the end of the hose protector on the
coolant reservoir breather hose contacts the
edge of the hole in the frame.
B. Face the white paint mark on the coolant
reservoir breather hose outward.
C. Install the radiator inlet hose completely onto
the hose fitting of the thermostat cover.
D. Connect the end of the radiator inlet hose that
is identified by the white paint mark to the
radiator.
E. White paint mark
F. Install the radiator inlet hose up to the
projection on the hose fitting.
G. Outward
H. Insert the projection on the holder into the
hole in the electrical components tray.
I. The fastener of the screw clamp should be
facing downward with the screw head facing
outward.
J. Downward
2-61
CABLE ROUTING