Chapter 2 Hardware Configuration
2-14. PLED CONNECTOR
FP1 (2, 4) : PLED Connector
The pin assignment is as follows:
PIN
2
4
2-15. CLEAR CMOS DATA SELECTION
JP6: Clear CMOS Data Selection
The selections are as follows:
FUNCTION
Normal
Clear CMOS
*** Manufacturing Default -- Normal.
Note: To clear CMOS data, user must power-off the computer and set the jumper
to "Clear CMOS" as illustrated above. After five to six seconds, set the
jumper back to "Normal" and power-on the computer.
Page: 2-14
ASSIGNMENT
PW_LED+
PW_LED-
JUMPER
SETTING
(pin closed)
Open
Close
JUMPER
ILLUSTRATION
1
1
PMB-881LF USER
'
S MANUAL