Plantronics Calisto User Manual page 34

DRAFT
Using the Handset with the Charging
Base
Locating the handset from the charging base
Press the handset locator
handset rings. After you have located the headset, press End
stop the ringing.
Press here
Note: The handset will
not ring if the battery
has run out of charge
Registering your handset with the charging base
Your handset comes pre-registered with the base. If the handset
screen displays "Searching for base" even when the handset is on
the base and the AC power adapter and phone cord are properly
connected, follow these steps to re-register the handset with the
base.
1. On the main screen, press Menu
(left soft key).
2. Use the navigator to highlight Initial Setup,
and press Select
3. Highlight Headset/Base, and press Select
(right soft key).
4. Highlight Register to Base, and press Select
key).
Page 38
button on the charging base. The
(right soft key).
to
(right soft