Key Lock; Recall Feature - Panasonic KX-TCD400TW Operating Instructions Manual

400TW(02).fm Page 21 Wednesday, February 19, 2003 7:03 PM

Key Lock

You can lock the handset dialling buttons. Only incoming calls are accepted while the
key lock is on. The key lock is cancelled if the handset is turned off.
When the key lock is on, emergency calls cannot be made until key lock is
cancelled.
Key Lock On
Press OK for more
than 2 seconds.
•
is displayed and all dialling buttons are locked.

Recall Feature

RECALL is used to access special telephone services. Contact your Network provider
for details. If your unit is connected to a PBX, pressing RECALL allows you to access
some features of your host PBX such as transferring an extension call.
Temporary Tone Dialling (for Rotary or Pulse
service users)
The diallinf mode is switched to tone. You can enter numbers for dialling which require
tone dialling eg. electronic banking service.
Before entering
access numbers.
• When you hang up, the mode will return to pulse.
Dialling Pause (for PBX line/long distance service
users)
A dialling pause is used when a pause in the dialling of the phone number is necessary
using a PBX accessing a long distance service.
For example, when 9 (line access number) is dialled followed by a pause to access an
outside line through a PBX:
1 2
9
Press REDIAL.*1
• Entering a pause prevents misdialling when you redial or dial a stored number.
• Pressing REDIAL once creates one pause. To extend the pause requirement time,
press REDIAL accordingly.
*1 is displayed on the LCD.
Key Lock Off
Press ASTERISK.
3
Phone Number
Handset Settings
Press OK for more
than 2 seconds.
4
Press TALK.
21