ProForm TrainerCycle PFEX38440 User Manual page 7

5. Orient the Seat Carriage Assembly (10) as shown.
Attach the Seat Carriage Assembly to the Seat
Bracket (11) with four M8 x 16mm Button Screws (61)
and four M8 Split Washers (55).
Attach a Handlebar (3) to the Seat Bracket (11) with
two M8 x 38mm Button Bolts (58) and two M8 Nylon
Locknuts (49). Make sure that the Nylon Locknuts
are resting in the hexagonal holes in the front of
the Handlebar.
Attach the other Handlebar (3) to the Seat Bracket
(11) in the same way.
6. Attach the Backrest (31) to the Seat Bracket (11) with
four M6 x 35mm Button Screws (63) and four M6
Washers (66).
7. Align the holes in the Seat (9) with the slots in the
Seat Bracket (11). Make sure that there is a space
between the Seat and the Backrest (31). Attach the
Seat to the Seat Bracket with four M6 x 16mm Button
Screws (8) and four M6 Washers (66).
5
49
3
6
31
11
7
9
Holes
11
Slots
66
7
3
11
55
61
55
61
58
10
66
66
8
8
61
55
66
63
63
31