Grounding Instructions - Kenmore 790.3223 series Use & Care Manual

Grounding Instructions

For personal safety, the cooktop must be properly grounded. For maximum
safety, the power cord must be plugged into an electrical outlet that is
correctly polarized and properly grounded.
DO NOT Operate the cooktop using a 2-prong adapter or an extension cord.
If a 2-prong wall receptacle is the only available outlet, it is the personal
responsibility of the consumer to have it replaced with a properly grounded
3-prong wall receptacle installed by a qualified electrician.
See the INSTALLATION INSTRUCTIONS packaged with this cooktop for
complete installation and grounding instructions.
This appliance is equipped with a 3-prong grounding
plug for your protection against shock hazard and should be plugged
directly into a properly grounded receptacle. DO NOT cut or remove the
grounding prong from this plug.
Liquefied Petroleum (Propane) Gas Conversion
This appliance can be used with Natural Gas and Propane Gas. It is
shipped from the factory for use with natural gas.
If you wish to convert your cooktop for use with propane gas:
- Models with Venturi (open) Burners, see the Installation Instructions
for the conversion instructions.
- Models with Sealed Burners, use the instructions in the envelope
attached, marked "FOR LP/PROPANE GAS CONVERSION".
Only a qualified service agent should perform the L. P. conversion.
Contact the local gas provider for conversion. An L. P. Conversion
Kit is supplied with this range and is located on the main back of the
range. The kit contains installation instructions which must be read
before and followed carefully when installing the kit.
Grounding type
wall receptacle
DO NOT use an adapter plug, an extension cord, or
remove grounding prong from electrical power cord.
Failure to follow this warning can cause serious injury,
fire or death.
to the cooktop, may occur if the cooktop is not
converted by a qualified installer or electrician.
additions, changes or conversions required in
order for this appliance to satisfactorily meet the
application needs must be made by a qualified
service agent.
5
Do not, under any
circumstances,
cut, remove, or
bypass the
grounding prong.
Power supply cord with
3-prong grounding plug
Avoid fire hazard or electrical shock.
Severe electrical shock, or damage
To avoid serious injury, any