Edge Blending - Epson EB-L1755U User Manual

Multi-Projection Function
When tiling is complete, adjust any positional gaps and the tint of the
projected images.
"Adjusting the projected images"
s

Edge Blending

You can fine tune the overlapping areas to make seamless screen.
a
Before performing edge blending to raise the precision of adjustments,
press the [Color Mode] button on the remote control, and then set
Color Mode to Multi-Projection.
a
Press the [Menu] button while projecting.
b
Select Multi-Projection from Extended.
c
Select Edge Blending, and then press the [
The following screen is displayed.
p.93
] button.
Submenu
Set to On to activate Edge Blending. Set to Off
Edge Blending
when not projecting from multiple projectors.
Top Edge/Bottom Blending: Set to On to activate Edge Blending
Edge/Left Edge/Right towards your settings, and the blend range will be
shaded.
Edge
Blend Start Position: Displays blending start
position as a red line, and adjusts at the level of one
pixel.
Blend Range: Adjusts the range to be shaded.
Adjustment is possible at the level of one pixel. The
maximum range is 45% of the resolution.
You can select from 16 ways of shading.
Blend Curve
Line Guide Set to On to display a guide on the Edge Blending
setting range.
Set to On to display a guide to match the position of
Pattern Guide
the Edge Blending setting range.
Guide Color Select a combination of guide colors from the six
provided.
97
Function