Sample Migrations Using The Import Command - Cisco Nexus 5000 Series Configuration Manual

Configuring Switch Profiles
switch-profile sp
sync-peers destination 10.193.194.52
port-profile type ethernet pp1
switch(config-sync)#

Sample Migrations Using the Import Command

Migrating Cisco NX-OS Release 5.0(2)N1(1) in a Fabric Extender A-A Topology Example
This examples shows the tasks used to migrate to Cisco NX-OS Release 5.0(2)N1(1) in a Fabric Extender
A-A topology. For details on the tasks, see the appropriate sections in this chapter.
Procedure
Step 1 Ensure configurations are the same on both switches.
Step 2 Configure the switch-profile with same name on both switches.
Step 3
Enter the import running config command on both switches.
Step 4 Enter the switch-profile name buffer command to ensure all configurations are correctly imported on both
switches.
Step 5
Remove unwanted configuration settings by editing the buffer.
For details, see
Step 6 Enter the commit command on both switches.
Step 7 Enter the sync-peers destination IP-address command to configure the peer switch on both switches.
Step 8 Enter the switch-profile name status command to ensure both switches are synchronized.
Migrating Cisco NX-OS Release 5.0(2)N1(1) in a Fabric Extender Fabric Extender
Straight-Through Topology Example
This example shows the tasks used to migrate to Cisco NX-OS Release 5.0(2)N1(1) in a Fabric Extender
Straight-Through topology. For details on the tasks, see the appropriate sections in this chapter.
Procedure
Step 1 Ensure the vPC port-channel configurations are the same on both switches.
Step 2
Configure the switch-profile with the same name on both switches.
Step 3 Enter the import interface port-channel x-y, port-channel z command for all vPC port-channels on both
switches.
Step 4
Enter the show switch-profile name buffer command to ensure all configurations are correctly imported on
both switches.
Step 5 Remove unwanted configuration settings by editing the buffer.
bandwidth 5000
bandwidth inherit
speed 10000
state enabled
Example: Configuring the Switch Profile Buffer, Buffer Move, and Deleting the
Cisco Nexus 5000 Series NX-OS System Management Configuration Guide, Release 5.2(1)N1(1)
Sample Migrations Using the Import Command
Buffer.
33