Advertisement
Installation
3
Figure 1
1. Hose
2. Coupling
4.
Select a location with the hose fitting assembly
on left side of mower inside the preferred
location diagram (Fig. 2 or 3).
Note:
Hose should not interfere with wheels,
handles or controls.
IMPORTANT: Location must be on a flat
surface and not obstructing any decals.
IMPORTANT: Look under mower, location
must be inside blade cutting circle away from
any mulching baffles and not interfere with
any other mower hardware.
Riding Mowers
Figure 2
1. Left side of mower
2
m–2911
1
2
3. Fitting
2
1
m–2855
2. –––– Preferred location
Walk-Behind Mowers
1
Figure 3
1. Left side of mower
Mark and Drill Holes
5.
Use fitting as a template and mark the location
of two mounting holes (Fig. 4).
6.
Place a straight edge between mounting holes
and mark the center line (Fig. 4).
7.
Measure half-way between mounting holes and
mark water hole location (Fig. 4).
8.
Center punch and drill two (2) 9/32" (8 mm)
mounting holes and one (1) 3/8" (9.5 mm) water
hole (Fig. 4).
2
1"
4
1"
2
3
Figure 4
1. Fitting
2. Mounting holes 9/32"
(8 mm)
2
m–2859
2. –––– Preferred location
m–2856
1
3. Center line
4. Water hole 3/8" (9.5 mm)
Advertisement
