Connect to a Wi-Fi Network
From the Home screen, tap
1.
➔
and network
Wi-Fi settings.
The network names and security settings (Open network or
Secured with WEP) of detected Wi-Fi networks are
displayed in the Wi-Fi networks section.
Tap the network you want to connect to.
2.
Note: When you select an open network, you will be automatically connected
to the network.
Enter a wireless password if necessary.
3.
Manually add your new network connection
1.
Tap Add Wi-Fi network.
Enter the Network SSID. This is the name of your Wireless
2.
Access Point.
Tap the Security field and select a security option. This
3.
must match the current security setting on your target
WAP.
If secured, you will also need to enter your WAP's
4.
password.
➔
➔
Settings
Wireless
Tap Save to store the new information and connect to your
5.
target WAP.
Note: The next time your device connects to a previously accessed or
secured wireless network, you are not prompted to enter the WAP key
again, unless you reset your device back to its factory default settings.
Turning Wi-Fi Off
From the Home screen, tap
1.
➔
and network
Wi-Fi settings.
Tap the Wi-Fi field to deactivate the feature. The green
2.
checkmark will be removed.
Note: Use of wireless data connections such as Wi-Fi and Bluetooth can
cause an added drain to your battery and reduce your use times.
Manually Scan for a Wi-Fi Network
From the Home screen, tap
1.
➔
and network
Wi-Fi settings.
➔
Press
Scan.
2.
➔
➔
Settings
Wireless
➔
➔
Settings
Wireless
Connections
97