Nokia N80 User Manual page 95

Hide thumbs Also See for N80:
Table of Contents

Advertisement

WEP key
settings—Enter
WEP encryption
key),
WEP key format (ASCII
or Hexadecimal), and
key
(the WEP key data in the selected format).
Security settings for
802.1x
and WPA/WPA2:
WPA
mode—Select the means of authentication:
use an extensible authentication protocol (EAP) plug-in, or
Pre-shared key
to use a password. Complete the
appropriate settings:
EAP plug-in settings
(only for EAP)—Enter the settings as
your service provider instructs.
Pre-shared key
(only for
Pre-shared
key)—Enter a
password. The same password must be entered on the
wireless LAN access point device.
TKIP
encryption—Select whether Temporal Key Integrity
Protocol (TKIP) is used.
Homepage—Define a home page.
Select
Options
>
Advanced settings
and from the
following:
IPv4
settings:
Phone IP address
(the IP address of your
device),
Subnet mask
(the subnet IP address),
gateway
(the gateway), and
DNS
address—enter the IP
addresses of the primary and secondary DNS server.
Contact your Internet service provider for these addresses.
(length of the
IPv6 settings
>
DNS
address—Select Automatic,
WEP
known, or
User
defined.
Ad-hoc channel
(only for Ad-hoc)—To enter a channel
number (1-11) manually, select
EAP
to
Proxy serv.
address—Enter the address for the proxy
server.
Proxy port
number—Enter the proxy port number.
Packet data
The packet data settings affect all access points using a
packet data connection.
Packet data
conn.—If you select
are in a network that supports packet data, the device
registers to the packet data network. Starting an active
packet data connection (for example, to send and receive
e-mail) is quicker. If there is no packet data coverage, the
device periodically tries to establish a packet data
connection. If you select
packet data connection only if you start an application or
action that needs it.
Access
point—The access point name is needed to use
Default
your device as a packet data modem to your computer.
Wireless LAN
Show
availability—Select whether
a wireless LAN is available.
Well-
User
defined.
When available
and you
When
needed, the device uses a
is displayed when
95

Advertisement

Table of Contents
loading

Table of Contents