View Messages On The Smartchip - Nokia N80 User Manual

To print an e-mail message on a compatible Basic Print
Profile (BPP) equipped printer with Bluetooth connectivity
(such as HP Deskjet 450 Mobile Printer or HP Photosmart
8150), select Options > Print.
Retrieve e-mail messages automatically
To retrieve messages automatically, select
mail settings > Automatic retrieval
retrieval > Always on or Only in home
when and how often the messages are retrieved.
Retrieving e-mail messages automatically may increase
your call costs due to the data traffic.
Delete e-mail messages
To delete the contents of an e-mail message from the
device while still retaining it in the remote mailbox, select
Options > Delete. In Delete msg.
only.
The device mirrors the e-mail headings in the remote
mailbox. Although you delete the message content, the
e-mail heading stays in your device. If you want to remove
the heading as well, you must first delete the e-mail
message from your remote mailbox, and then make a
connection from your device to the remote mailbox again
to update the status.
52
To delete an e-mail from the device and the remote
mailbox, select
select Phone and
If you are offline, the e-mail is deleted first from your
device. During the next connection to the remote mailbox,
it is automatically deleted from the remote mailbox. If you
Options > E-
are using the POP3 protocol, messages marked to be
> Header
deleted are removed only after you have closed the
net., and define
connection to the remote mailbox.
To cancel deleting an e-mail from the device and server,
scroll to an e-mail that has been marked to be deleted
during the next connection (
Undelete.
Disconnect from the mailbox
When you are online, to end the data connection to the
from:, select Phone
remote mailbox, select

View messages on the SmartChip

Before you can view SmartChip messages, you must copy
them to a folder in your device.
1
In the Messag.
messages.
2 Select Options
mark messages.
Options > Delete. In Delete msg. from:,
server.
), and select Options >
Options > Disconnect.
main view, select Options > SmartChip
> Mark/Unmark > Mark or Mark all to