Nokia N80 User Manual page 94

Prompt password—If you must enter the password every
time you log in to a server, or if you do not want to save
your password in the device, select Yes.
Password—A password may be needed to make a data
connection, and is usually provided by the service
provider.
Authentication—Select Normal
Homepage—Depending on the access point you are
setting up, enter the Web address or the address of the
multimedia messaging center.
Select Options > Advanced settings
following settings:
Network type—Select the Internet protocol type to use:
IPv4 settings or IPv6 settings. The other settings depend
on the selected network type.
Phone IP address (for IPv4 only)—Enter the IP address of
your device.
DNS address—In Primary name
address of the primary DNS server. In
server:, enter the IP address of the secondary DNS server.
Contact your Internet service provider to obtain these
addresses.
Proxy serv. address—Define the address for the proxy
server.
94
Proxy port number—Enter the proxy port number.
Wireless LAN
Follow the instructions from your service provider.
WLAN netw.
netw.. If you select an existing network,
mode and WLAN security mode
or Secure.
settings of its access point device.
WLAN netw.
network and to allow devices to send and receive data
directly; a wireless LAN access point device is not needed.
to change the
WLAN security
802.1x (not for ad hoc networks), or WPA/WPA2. If you
select Open
802.1x, and WPA functions can be used only if the network
supports them.
WLAN security
security mode:
serv.:, enter the IP Security settings for WEP:
Second. name
Wep key in
create up to four WEP keys. The same settings must be
entered on the wireless LAN access point device.
Authentication
authentication type between your device and the wireless
LAN access point device.
name—Select Enter manually or Search for
WLAN netw.
are determined by the
mode—Select Ad-hoc to create an ad hoc
mode—Select the encryption used: WEP,
network, no encryption is used. The WEP,
sett.—Enter the settings for the selected
use—Select the WEP key number. You can
type—Select Open or Shared for the