Led Explanation - TP-Link TL-WA850RE User Manual

Chapter 1
1 2 1

LED Explanation

You can check the extender's working status by following the LED Explanation table.
Name
RE
Wireless
Power
(Signal Strength)
Ethernet
1 2 2 Port and Button Description
Ports or Buttons
(WPS Button)
RESET Button
Ethernet Port
Note:
1. The provided plug may differ from the picture due to different regional power specifications.
2. Use the product in below directions.
Status
The extender is connected or not connected to your router's
On/Off
wireless network.
Blinking WPS connection is in process.
On/Off The extender's wireless function is enabled or disabled.
On/Off The extender is on or off.
Blinking The system is starting up or firmware is being upgraded.
Indicates the Wi-Fi connection between the extender and the
On
router. More lit LEDs indicate a better signal strength.
The Ethernet port is connected or not connected to a powered-
On/Off
on device.
Press the WPS button on your host router, and immediately press the
on the extender for 1 second. The RE LED of the extender should change from
blinking to solid on, indicating successful WPS connection.
With the extender powered on, use a pin to press the RESET button for 1
second. The extender will reboot.
Connect your Ethernet-only device to the Ethernet port of the extender to join
the network.
Or
Get to Know About Your Extender
Indication
Description
button
4