4
7
1
3
5
6
BRC 46/38 C 86306850 12/27/07
CONTROLS/COMPONENT LOCATIONS
1. Main Handle. Used to pull and maneuver
machine.
2. Handle Adjustment. Used to adjust height of
handle.
3. Electrical Cord.
4. Pump Switch. Turns on pump and enables
spray.
5. Brush/Spray Switch. Turns on brush motor and
activates electro-valve to dispense solution to
8
floor through jets. Intermittent, off, and
continuous settings.
6. Vacuum Motor Switch. Turns on vacuum
motor.
7. Brush Motor Circuit Breaker. 6 amp. Breaker
protecting brush motor.
8. Vacuum Motor Circuit Breaker. 15 amp.
Breaker protecting vacuum motor.
9. Recovery Dump Hose. Facilitates draining
dirty cleaning solution.
10. Solution Dump Hose. Facilitates draining
excess cleaning solution from solution tank.
9
10
2
3-2