CORRECT
INCORRECT
PUMP
ON
STEP
STEP
STEP
1/8in
(3mm)
STEP
VACUUM
ON
BRC 46/38 C 86306850 12/27/07
Remove electrical cord and literature from
1
recovery tank. Fill solution tank (see filling
instructions page 3-5).
Plug cord into grounded outlet. Note: Be sure
2
dome is seated on recovery tank, and float
shut-off is installed correctly.
Adjust brush to proper setting. Note: For
3
good operation the brush must skim the
carpet. If circuit breaker trips raise brush to
prevent damage to motor or carpet.
Turn on both Vacuum and Pump motor
4
switches ("ON"="I").
OPERATIONS
3-6