Table of Contents
Advertisement
6. Help
If the Baby unit has lost its link with theParent unit
• Try recharging or replacing the batteries.
• If the Baby unit is too far away it may be going out of range, so move the Baby
unit closer to the parent unit.
• Reset the units by unplugging the units from the mains power socket. Wait
for around 15 seconds before plugging back in. Allow up to one minute for
the baby unit and the parent unit to synchronise.
Interference
Noise interference on your Parent unit
• Your Baby and Parent units may be too close. Move them further away from
each other.
• Make sure there is at least 1 metre between the 2 units to avoid feedback
howling.
• If the Baby unit is too far away it may be going out of range, so move the Baby
unit closer to the parent unit.
• Make sure the Baby and Parent units are not near other electrical equipment,
such as a television, computer or cordless/mobile telephone.
Help
13
Advertisement
Table of Contents
