Interface Menu - Printekmobile FieldPro RT43 Series Operator's Manual

PRINT ALL LOGOS IN MEMORY
Menu Item
Print All Logos in Memory
OPTIONS MENU
Menu Item
Left Paper Guide Adjust
Right Paper Guide Adjust
Auto Power Down
Print Promo
Print Header
HARDWARE MENU
Menu Item
Enter Hex Dump Mode
Burnin Mode
Reset to Factory Defaults
The Interface Menu is actually a series of menus. These menus are used to match the printer to the host system
or device that will be used to send and/or receive data to/from the printer. Which Interface Menu affects the
printer is dependent upon whether an optional Bluetooth or Wi-Fi interface is installed, and if so, which
interface is currently selected as the active interface. Switching the active interface from one interface to the
other is only available through Control Panel Setup and is described on page 25. The menu features for the
Serial, Bluetooth, and Wi-Fi interfaces are described below.
Note: When using Control Panel Setup, you may select "Print Interface Settings" to obtain all the features
and their values for the currently selected interface.
Values
n/a
Values
A – G
None, 1 – 9
Off, 1 – 15 Minutes
Off, On
Off, On
Values
Off, On
Off, On
Hold Power 10 Sec.

Interface Menu

Printer Configuration
Modify From
Default Value Control
Panel
n/a
*
Modify From
Default Value Control
Panel
A
None
Off
Off
Off
Modify From
Default Value Control
Panel
Off
Off
n/a
Setup
Utility
Setup
Utility
Setup
Utility
15