Fujitsu Storage ETERNUS AF650 S2 Basic Operation Manual page 39

Chapter 2 Basic Operation
2.2 Powering On and Off
1
Press and hold the Power switch of the controller enclosure for four seconds or more.
Power switch
The READY LED on the controller enclosure is turned off.
Press the Power switch only once. If the Power switch is pressed again between the time of the
READY LED turning off and the POWER LED turning off, the ETERNUS AF power may turn on.
2
The power of the ETERNUS AF is disconnected.
When the power is disconnected, the POWER LED of the controller enclosure and the POWER LEDs of the
drive enclosures are turned off.
FUJITSU Storage ETERNUS AF650 S2, ETERNUS AF650 All-Flash Arrays Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
Controller enclosure
39
P3AG-1932-04ENZ0