D-Link DIR-615A User Manual page 144

DIR-615A Wireless N300 Router
Configuring via Web-based Interface
User Manual
Figure 113. The page for adding a rule for IP filtering.
You can specify the following parameters:
Parameter Description
General Settings
Move the switch to the right to enable the rule.
Enable rule
Move the switch to the left to disable the rule.
Select an action for the rule.
Allow: Allows packet transmission in accordance with the criteria
Action specified by the rule.
Deny: Denies packet transmission in accordance with the criteria
specified by the rule.
A protocol for network packet transmission. Select a value from the
Protocol
drop-down list.
An IP version to which the rule will be applied. Select the relevant
IP version
value from the drop-down list.
Source IP Address
Page 144 of 174