D-Link DIR-615A User Manual page 112

DIR-615A Wireless N300 Router
User Manual
In the Wireless Networks section, the list of available wireless networks is displayed. To view
the latest data on available wireless networks, click the Update list button.
To connect to a wireless network from the list, select the needed network. Move the Additional
parametres switch to the right to view more detailed information on the network to which the
router connects. If a password is required, enter it in the relevant field. Click the CONNECT
button.
To connect to a hidden network, select the Connect to hidden network value from the
Connecting to network drop-down list. Enter the name of the network in the SSID field. If
needed, fill in the BSSID field. Then select the needed type of authentication from the Network
authentication drop-down list.
When the Open, WEP-64, or WEP-128 authentication type is selected, the following settings are
displayed on the page:
Parameter
Enable encryption WEP
WEP type
Default key ID
Encryption key WEP as
HEX
Encryption key
(1-4)
For Open authentication type only.
To activate WEP encryption, move the switch to the right. Upon that
the WEP type and Default key ID drop-down lists, the
Encryption key WEP as HEX switch, and four Encryption key
fields are displayed on the page.
For Open authentication type only.
WEP encryption type with a 64-bit or 128-bit key.
Select the WEP-64 value to specify keys containing 5 ASCII
symbols or 10 HEX symbols.
Select the WEP-128 value to specify keys containing 13 ASCII
symbols or 26 HEX symbols.
The number of the key (from first to fourth) which will be used for
WEP encryption.
Move the switch to the right to set a hexadecimal number as a key
for encryption.
Keys for WEP encryption. The router uses the key selected from the
Default key ID drop-down list. It is required to specify all the
fields.
Page 112 of 174
Configuring via Web-based Interface
Description