Redirect - D-Link DIR-615A User Manual

DIR-615A Wireless N300 Router
User Manual

Redirect

On the Advanced / Redirect page, you can enable notifications on the reason of the Internet
connection failure. Notifications will be displayed in the browser window when a user is attempting
to open a web site on the Internet.
To configure notifications, in the Common Settings section, move the Enable redirect switch
to the right. Then, in the Reasons for Redirect section, move the needed switches to the right.
Parameter
Physical connection
error
The device is not
configured
No connection
Firmware update
When you have configured the parameters, click the APPLY button.
To disable notifications, move the Enable redirect switch to the left and click the APPLY button.
Figure 100. The Advanced / Redirect page.
Reasons for Redirect
Notifications in case of physical connection problems (the ISP's
cable is not connected, an additional device needed to access the
Internet is not connected).
Notifications in case when the device works with default settings.
Notifications in case of problems of the default WAN connection
(authorization error, the IPS's server does not respond, etc.).
Notifications in case of update of the device's firmware.
Page 129 of 174
Configuring via Web-based Interface
Description