At least two qualified people should perform the installation procedure. Injury and/or damage can result from dropping or mishandling the flat panel display. Page 2 Table of Contents Contact Premier Mounts with any questions. PSD-S Installation Instructions...
This ceiling mount is shipped with all proper installation hardware and components. Make sure that none of these parts are missing and/or damaged before beginning installation. If there are parts missing and/or damaged, please stop the installation and contact Premier Mounts (800-368-9700). Ceiling Adapter...
Attaching the Ceiling Adapter Before the following steps are begun, the appropriate suspension device must be installed. Premier mounts offers the AST-1321, AST-2446 or a standard 1-1/2” NPT extension pipe. Please see the installation instructions that are included with these respective mounting configurations.
Page 5
PSD-S A Phillips head screwdriver is required to perform the following step. Step 2. Once the ceiling adapter has been attached, tighten the M6 x 12mm Phillips head set screw using a Phillips screwdriver. Installation Instructions Page 5...
PSD-S Attaching the Mounting Plate Step 1. Use four (4) M10 hex head bolts, eight (8) M10 fl at washers, and four (4) M10 nuts to attach the mounting plate to the ceiling adapter. At this time, fi nger tighten all hardware.
Page 7
PSD-S A 17mm open-end wrench and a 17mm socket wrench will be required to perform the following step. Step 2. Once the both units have been attached together, use a 17mm socket wrench and a 17mm wrench to tighten the M10 hardware.
What Premier Mounts Will Do At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective. If Premier Mounts chooses to replace a defective product or part, a replacement product or part will be shipped to you at no charge, but you must pay any labor costs.