To Avoid Injury; Maintenance - HoMedics Shiatsu Air Pro Instruction Manual And Warranty Information

NOTE: This unit may turn off after an extended period of use. If your unit
turns off (LED may remain on). If your unit overheats, unplug the unit and let
cool for 30 minutes before plugging in again and continuing use.
Instructions for Use
To reduce the risk of electric shock, this unit is equipped with a polarized
plug (one blade wider than the other). This plug will fit in a polarized outlet
Fig. 1
only one way. If the plug does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician to install the proper outlet. Do
not change the plug in any way.
1. Plug into a 120-volt outlet.
2. It is highly recommended that you wear socks while using this foot
massager. Do not use the unit with shoes.
3. Place massager on the floor in front of your chair or seat and place feet
in massager.
4. To activate massage, press the POWER button once (Fig. 1). The button
will illuminate white to confirm your selection. The unit will start with both
Fig. 2
air and knead at low intensity.
Air Intensity Button
1. Pressing the AIR INTENSITY button will allow you to adjust the intensity of
the air pressure, how firmly it squeezes your feet. (Fig. 2).
2. Press MODE button until AIR INTENSITY button is illuminated.
3. When first turned on, AIR INTENSITY will begin in the lowest setting with
the button illuminated dull blue.
4. Pressing the button again will change the foot pressure to medium,
indicated by a brighter blue.
5. Pressing the button a third time will change the pressure to high, indicated
Fig. 3
by the brightest blue.
6. Pressing the button once more will return the pressure to its lowest
setting.
Mode Button
1. Pressing the MODE button starts the unit with both air and knead in low
intensity. Both sides of the button will be illuminated (Fig. 3).
2. Pressing the button again will change the unit to air only. The left side of
the MODE button will illuminate blue.
3. Pressing the button a third time will change the unit to knead only. The
right side of the MODE button will illuminate green.
Fig. 4
4. Pressing the button once more will return the unit to air and knead. AIR
INTENSITY, MODE, and KNEAD INTENSITY buttons will all be illuminated.
4
Knead Intensity Button
1. Pressing the KNEAD INTENSITY button will allow you to adjust the
intensity of the massaging mechanism (Fig.4).
2. Press MODE button until the KNEAD INTENSITY button is
illuminated.
3. When first turned on, KNEAD INTENSITY will begin in the lowest
Fig. 5
setting with button illuminated dull green.
4. Pressing the button again will change the massage intensity to
medium, indicated by a brighter green.
5. Pressing the button a third time will change the intensity to high,
indicated by the brightest green.
Caution:
6. Pressing the button once more will return the intensity to its lowest

To avoid injury

setting.
and irreparable
Heat Button
damage, always
1. To activate soothing heat, first select AIR or KNEAD. Then simply
remain seated press the HEAT button and it will illuminate red (Fig. 5).
2. To turn heat off, press the button again and the red light will turn off.
when using
NOTE: For your safety, heat cannot be turned on unless air and/or
massager. Never
knead program is selected.
stand on the
unit. When finished, turn the unit "OFF" and unplug.

Maintenance

To Store
Place massager in its box or in a safe, dry, cool place. Avoid contact
with sharp edges or pointed objects. To avoid breakage, DO NOT
wrap the power cord around the unit. DO NOT hang the unit by the
controller cord.
To Clean
Unplug the unit and allow it to cool before cleaning. Clean only with a
soft, slightly damp sponge. NEVER allow water or any other liquids to
come into contact with the unit.
• DO NOT immerse in any liquid to clean.
• Never use abrasive cleaners, brushes, or strong chemicals
that might or might not be flammable and/or damaging to
the product to clean.
• DO NOT attempt to repair the massager. There are no user
serviceable parts. For service, contact the Consumer Relations
telephone number listed in the warranty section.
5