Accessing Club Programming Mode And Changing The Settings - Precor Cycle 842i Owner's Manual

Accessing Club Programming Mode
and Changing the Settings
Read the Club Programming Tips to identify useful information
about customizing your Precor equipment.
To access the available menus and change the program settings,
perform the following steps:
1. At the Precor banner, press the following keys in sequence
without pausing between selections:
RESET, 5, 6, 5, 1, 5, 6, 5
Note: A PAUSE/REST key appears on some products and
functions the same as the RESET key.
The club programming prompts appear sequentially and in a
menu format. The following table describes which keys to use in
club programming mode.
Product Owner's Manual: Club Features
Table 3. Club Programming Mode keys
Key Description
▲ ▼
or Navigational arrow keys
OK OK key
CLEAR Number keypad CLEAR
key
RESET RESET key or
PAUSE/RESET key
Note: The number keypad is disabled once you enter club
programming mode.
Function
Moves you through the
programs and selections.
Lets you choose or accept the
displayed selection.
Returns to the previous menu
level without saving any
changes.
Exits Club Programming Mode
and returns to the Precor
banner.
16