Advertisement
General Information
The refrigerating system for this freezer is mainly composed of a fully-closed refrigerating
compressor, an interior evaporator closely compacted, properly processed with a good
cooling result. It is convenient for use, quiet and saves on electricity.
The hard polyaminoester foam (made from spot high-pressured foaming) is used for the thermal
insulation which results in good performance and durability.
The Interior door case is non-poisonous and odorless and formed by easy-to-clean ABS plastic.
It is made of a specially treated embossed aluminium sheet, which results in a generally good;
clean-looking,and durable unit.
The cabinet and door are made of imported cold-rolled sheets which have been bonderized
and electrostatic-painted, is consistent in thickness, corrosion-resistant, flexible and
scratch-resistant.
Reminders Before Use
Heat sources
Heat sources
more
than
30cm
3
Keep upright as possible during handling, tilt
never upside down or horizontally and do not roll unit over
45
uneven surface.
The freezer should be placed in ventilated area avoiding
direct sunlight, heat source and rain. There should be no
sunlight
corrosive gases in surrounding air. Keep stable by adjusting
the four castors when necessary.
All packaging material should be removed. Do not use bottom
foam as vibration-proof material.
45 ,
3
Advertisement
