Selecting A Faster Response Time For Gaming; Using Auto-Sleep Mode - HP OMEN W9S97AA User Manual

Selecting a faster response time for gaming

You may choose to set a faster response time.
1. Open the OSD menu.
2. Select Image Control and then select Response Time.
3. Select one of the following levels from the Response Time menu:
Level 1 (Default)
Level 2 (Fast)
Level 3 (Faster)
Level 4 (Fastest)
NOTE:
as 5 ms in the display menu. All performance specifications represent the typical specifications provided
by HP's component manufacturers; actual performance may vary either higher or lower.

Using Auto-Sleep Mode

The display supports an OSD option called Auto-Sleep Mode that allows you to enable or disable a reduced
power state for the display. When Auto-Sleep Mode is enabled (enabled by default), the monitor will enter a
reduced power state when the host PC signals low power mode (absence of either horizontal or vertical sync
signal).
Upon entering this reduced power state sleep mode, the monitor screen is blanked, the backlight is turned off
and the power LED indicator turns amber. The monitor draws less than 0.5W of power when in this reduced
power mode. The monitor will wake from the sleep mode when the host PC sends an active signal to the
monitor (for example, if you activate the mouse or keyboard).
You can disable the Auto-Sleep Mode in the OSD. Press the Menu button on the rear to open the OSD. In the
OSD select Power Control > Auto-Sleep Mode > Off.
The default response time for the monitor is 7 ms. The response time can be adjusted to as low
Using Auto-Sleep Mode 15