Capabilities Of The Ethernet Connection - GE moisture.IQ User Manual

Moisture and oxygen analyzers
Hide thumbs Also See for moisture.IQ:
Table of Contents

Advertisement

Chapter 6. Setting Up Communications
6.4.1 Configuring the Ethernet TCP/IP Connection (cont.)
LAN Access
2. If the
the TCP/IP connection (changes to the settings can only be made when the connection is
the moisture.IQ
IP Address
3. Tap the
enter values for the
Gateway
address in the text boxes provided.
DNS
4. Tap the
button and select either
DNS
values for the
Note: For troubleshooting purposes, automatically assigned addresses are visible on this screen.
5. After the TCP/IP connection has been configured, tap the
Return
button to return to the Configuration Menu.

6.4.2 Capabilities of the Ethernet Connection

IMPORTANT:
The Web Server opens
1
IMPORTANT:
VNC
The
connection opens
The moisture.IQ allows two methods of remote access and control:
An embedded Web Server allows access to the moisture.IQ status and files using a standard web browser.
A Virtual Network Computing (
VNC clients.
Note: Both the Web Server and the VNC Server are disabled by default.
Access to the web server requires a user name and password. The moisture.IQ provides two accounts for configuration
and general administration. Up to three additional accounts can be created for use as needed. Each account has a set of
permissions that can be configured to limit network access to moisture.IQ features. The two pre-defined accounts are:
Admin
Operator
1
®
VNC
is a registered trademark of RealVNC Ltd
76
button indicates that the TCP/IP connection is currently
MAC Address
is shown as a read-only value.
button and select either
IP Address
in dotted decimal notation (e.g., 192.168.1.123), the
Automatic
Alternate DNS
and
in the text boxes provided.
Port 80
when it is Enabled.
port 5900
VNC
) server allows full remote control of the moisture.IQ using any of several
Automatic
Static
or
from the drop-down list. If
Static
or
from the drop-down list. If
Check
button to save your settings. Then, tap the
(user-configurable) when
Enabled
, tap this button to
Disabled
Static
Subnet
mask and the
Static
is selected, enter
Enabled
.
moisture.IQ User's Guide
Disable
). Note that
is selected,

Advertisement

Table of Contents
loading

Table of Contents