Table of Contents
Advertisement
Chapter 1. Installation and Wiring
1.9.4b
Weatherproof Delta F Oxygen Cells
The weatherproof oxygen cell has a set of sensing and secondary electrodes that are wired to a terminal strip in the
weatherproof enclosure. Connect the weatherproof oxygen cell using a four-wire shielded cable with a mating
bayonet-type connector. Fasten the bayonet-type connector to the mating connector on the bottom of the weatherproof
enclosure. Connect the other end of the cable to the
Figure 18 on page 22 and Table 3 below for the required connections.
green wire (–)
24
Table 3: Weatherproof Delta F Oxygen Cell Connections
To Delta F Enclosure
Connect:
Terminal Block
red wire (+)
white wire (+)
black wire (–)
OXYGEN
terminal block on the back of the moisture.IQ. Refer to
To moisture.IQ OXYGEN
Terminal Block
pin 1
pin 2
pin 3
pin 4
pin 4
pin 3
pin 2
pin 1
moisture.IQ User's Guide
Advertisement
Table of Contents
