Advertisement
DIAGRAM AND PARTS DESCRIPTION
1.
Instrument / Microphone Input with Volume Control (1/4") – This
mono input accepts a 1/4" input such as a microphone, guitar, or
other musical instrument.
2.
Auxiliary input – This stereo 1/8" input can be used to connect a CD
player, MP3 player, or other audio source.
3.
Bluetooth® – The Paired LED will be lit when a device is paired to
ROAD ROCKER. This LED will not be lit when ROAD ROCKER is
first powered on (unless it was previously paired with a device). Press
the Disconnect button to disconnect a connected Bluetooth device.
4.
Master Volume Control – This knob controls the master volume of
the ROAD ROCKER.
5.
Power LED – Indicates whether ROAD ROCKER is on or off.
6.
Device Cradle – Place iPad/iPod touch®/iPhone® or other devices
here to be held.
7.
Dock Charge – Connect your own device's charge cable here to
charge the device.
Note: Users with iPad (3
recommend charging with the screen locked when using iPad (3
Gen).
Note: Dock charging for your device is only possible when ROAD
ROCKER is plugged into wall power.
8.
Power Cable Input – Insert the included power cable here to charge
the unit. Note that the ROAD ROCKER can run off the power adapter
(9v DC 2A pin positive) while it simultaneously charges the battery. The charge
indicator illuminates when the battery is charging.
9.
Power ON/OFF Switch – Turns ROAD ROCKER on or off. Please note that while
ROAD ROCKER is connected to a power source, it does not need to be powered
on to charge the battery.
10.
Battery Level Indicator – While the unit is powered ON, these four lights indicate
the power left in the battery. Battery life varies based on volume and usage.
11.
Charging LED – This illuminates when the unit is attached to wall power and is in
the process of charging.
IMPORTANT NOTES
Use this troubleshooting guide if:
The sound is distorted at high volumes.
The sound is distorted: Try lowering the volume control of your sound source or music instrument. Also, try to reduce the
overall volume of ROAD ROCKER.
There is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass level. This will allow
you to play the music louder before clipping (distortion) occurs.
There is a high-pitched whistling noise when using microphones: This is probably feedback. Point the microphones away
from the speaker.
PAIRING A BLUETOOTH DEVICE
1.
Turn on your Bluetooth device.
2.
Power on ROAD ROCKER and it will automatically go into pairing mode to search for Bluetooth devices.
3.
Navigate to your Bluetooth device's setup screen, find "ION Speaker" and connect.
4.
ROAD ROCKER LED will light up solid when it is 'paired'.
5.
To disconnect pairing, press the 'Disconnect' button on ROAD ROCKER.
6.
To connect to another Bluetooth device, repeat steps 3-4.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0.
Note: If your Bluetooth device is not able to pair to the amp, press the disconnect button on the amp to break previous
Bluetooth connections and reset the Bluetooth module.
Note: You can pair with an iPhone, iPad, computer, or Android® device equipped with Bluetooth that supports A2DP. Android
users should consider updating their OS if experiencing trouble with pairing or playing music.
Note: If your Bluetooth device prompts for a pairing code, enter '0000'.
iPhone and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
Android is a trademark of Google Inc.
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
ION Audio is under license. Other trademarks and trade names are those of their respective owners.
rd
Gen) may experience slower charging. We
9
8
rd
4
7
6
5
1
1
4
3
2
11
11
10
10
9
8
Advertisement
