ECS B250H4-M20 User Manual page 57

Power Limit 1 Value (0)
Power limit 1 in Milli Watts and stepsize is 125mW .XE SKU: Any value can be
programmed. Overclocking SKU: Value must be between Max and Min Power Limits
(specified by PACKAGE_POWER_SKU_MSR). Other SKUs: This value must be between
Min Power Limit and TDP Limit. If value is 0, BIOS will program TDP value.
Power Limit 1 Time Window (0)
Power limit 1 Time Window value in seconds. The value may vary from 0 to 128. If the
value is 0, default values will be programmed (28 sec for Mobile and 1 sec for
Desktop). Indicates the time window over which TDP value should be maintained.
Power Limit 2 Override (Enabled)
Use this item to enable or disable the Power Limit 2 Override. If this option is
disabled, BIOS will program the default values for Power Limit 2.
Power Limit 2 Value (0)
Power limit 2 value in Milli Watts and stepsize is 125mW. If the value is 0, BIOS will
program this value as 1.25*TDP. Processor applies control policies such that the
package power does not exceed this limit.
Power Limit 3 Settings

Scroll to this item and press <Enter> to view the following screen:
Main
Power Limit 3 Settings
Power Limit 3 Override
Power Limit 3 Override (Disabled)
Use this item to enable or disable the Limit 3 Override. If this option is disabled, BIOS
will leave the default values for Power Limit 3 and power limit 3 time window.
Press <Esc> to return to the CPU OverClocking Configuration page.
52
Advanced Chipset
B250H4-M20 USER MANUAL
Tweak Security
Enable/DisablePower Limit 3
override. If this option is
Disabled
disabled, BIOS will leave the
default values for Power Limit
3 and Power Limit 3 Time
Window.


Enter/Dbl Click : Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Boot Exit
: Select Screen
/Click: Select Item