Installing Memory Modules - ECS B250H4-M20 User Manual

2-4-3. Installing Memory Modules

• This motherboard accommodates two memory modules. It can support
two 288-pin DDR4 2400/2133 MHz.
• Do not remove any memory module from its antistatic packaging until
you are ready to install it on the motherboard. Handle the modules only
by their edges. Do not touch the components or metal parts. Always wear
a grounding strap when you handle the modules.
• You must install at least one module in any of the two slots. Total memory
capacity is 32 GB.
• Refer to the following to install the memory modules.
A.
B.
seats correctly. Check that the cutouts on the DIMM module edge
connector match the notches in the DIMM slot.
C.
DIMM.
We suggest users not to mix memory type. It is recommended to use the
same brand and type memory on this motherboard.
12
Push the latche on the mobilizable side of the DIMM slot down.
Install the DIMM module into the slot and press it firmly down until it
The slot latche is levered upwards and latch on to the edges of the
* For reference only
B250H4-M20 USER MANUAL