Operation tips
Navigation arrows
Dotted line -------
Tick
System messages
Fault messages
20
Symbols in the display
If a menu contains more than two options, two navigation arrows are
shown beside the options. The arrow buttons and can be used
to scroll through the options.
If a menu contains more than two options, the end of the option list is
marked by a dotted line. The last entry appears above the line, the
first entry below it.
If there are several options available, the current setting is marked
with a tick .
Example:
Delay start
No
(
Yes
The symbol denotes system messages. If OK appears in the bottom
right of the display, the system message must be confirmed using the
OK button. If OK does not appear in the display, after a few seconds
the display skips to the next level up.
In the event of a fault, a warning triangle is shown in place of the
symbol. See "Frequently asked questions" for more information.