Using the machine
- - - - - -
22
Symbols in the display
Navigation arrows
If a menu consists of more than two options, two navigation arrows
are shown at the side of the menu options.
Use the and arrow buttons on the control panel to navigate
through the menu.
Dotted line
If a menu contains more than two options, the end of the option list is
marked by a dotted line. The last entry appears above the line, the
first entry below it.
Tick
If there are several options available, the current setting is marked
with a tick .
System messages
The symbol denotes system messages. These give information,
such as if the level is too low in the supply containers or a reminder
for the next service.
System messages are displayed at the start and end of a programme
and have to be confirmed (acknowledged) individually with OK or all
together at the end of the programme by opening the door. If the
symbol appears in the display during a programme, the system
messages can be accessed by pressing and holding the OK button.
Fault messages
In the event of a fault a warning triangle is shown in place of the
symbol. See "Problem solving guide" and "After sales service" for
more information.
Settings
Language
Date
Language
deutsch
english (GB)
(
Refill salt