Samsung AE090JNYDEH User Manual page 37

Use of field specification checking mode
1 If you want to use the field specification checking mode for your wired remote controller, press
the Set and [ ]buttons at the same time for more than 3 seconds.
2 Refer to the list of field specification for your wired remote controller on the next page, and
select the desired menu.
• Using the [ ]/[ ] buttons, select a main menu number and press the [ ] button to enter the sub-
menu checking screen.
• Using the [ ]/[ ] buttons, select a sub-menu number and press the [ ] button to enter data
checking screen.
• When you enter the checking stage, the current setting value will be displayed.
• Press the [ ] button to move previous setting value.
• While configuring the sub manu setting, press the ESC button to exit to normal menu.
NOTE
• While configuring the checking, press the ESC button to exit to the sub-menu setting
screen.
• When you don't enter any buttons for more than 3 minutes, you will be back to normal mode.
Main menu Sub-menu
Data
37 37
English English