Base Idle Mode, Corded Headset Placed In Cradle, Headset In Phone Mode; Base In Hold Mode, Corded Headset In Cradle - VTech VTH1930 Product Specification

TITLE
MODEL

3.2.3 BASE IDLE Mode, Corded Headset Placed in Cradle, Headset in PHONE Mode

The base is always in idle mode when the corded headset is placed in the base cradle.
The response to stimuli while in IDLE mode with the headset in PHONE Mode is outlined below:
Base Action
CORDED HANDSET LIFTED
SWITCH HOOK FLASHED
HOLD KEY
INTERCOM
MEM
REDIAL
QUICK MEM
PROGRAM
# KEYS
Remote Dialcard Action
ALL KEYS
Headset Action
ALL KEYS

3.2.4 BASE in HOLD Mode, Corded Headset in cradle

Hold mode can be initiated from either the headset or base unit by pressing the pressing the
HOLD key when either the base or headset is in PHONE mode.
The following describes the reponse to stimuli when the base is in HOLD Mode:
Base Action
CORDED HANDSET PICKED
UP
SWITCH HOOK FLASHED
INTERCOM
MEM
REDIAL
QUICK MEM
PROGRAM
# KEYS
Reference: PRC 00B6
This document is proprietary to V
Specifications are preliminary and are subject to change without notice.
V E
TECH NGINEERING
Product Specification
VTH1930 (Wireless Headset Phone)
Response
BASE PHONE MODE
N/A
ON HOLD
NO ACTION (no keybeep)
ACCEPT MEM LOCATION
DIAL OUT CONTENTS OF REDIAL BUFFER
DIAL OUT CONTENTS OF MEM LOCATION 00
NO ACTION (no keybeep)
DIAL OUT CORRESPONDING DTMF OR PULSE DIGITS
(except * key activates temporary tone in pulse mode)
NO RELATED BASE ACTION
NO RELATED BASE ACTION
Response
HOLD CANCELLED - BASE PHONE MODE
N/A
NO ACTION (no keybeep)
NO ACTION (no keybeep)
NO ACTION (no keybeep)
NO ACTION (no keybeep)
PROGRAM MODE
NO ACTION (no keybeep)
E C
TECH NGINEERING ANADA
C
ANADA
Response
Response
Revision: 0
L .
TD
L .
TD
Page: 22 of 31
21146