Omron V680-HA63A User Manual page 33

Nomenclature
Operation indicators
Antenna Connection Port
The Antenna connection port is connected a V680-series Antenna.
Controller Connector
The Controller connector is connected to Antenna connection port on the Controller.
Operation Indicators (LEDs)
Name Color
RUN Green Lit when the power is ON.
Yel- Lit when a command is being sent.
COMM
low
NORM Green Lit when communications with a Tag are normal in Normal Communications Mode.
ERR Red Lit when an error occurs in communications with a Tag in Normal Communications Mode.
Yel- Maintenance Mode: Lit at distance or speed level 6.
LV6/7D
low Normal Communications Mode: Lit when a write protection error occurs.
Yel- Maintenance Mode: Lit at distance or speed level 5 or higher.
LV5/7A
low Normal Communications Mode: Lit when an address error occurs.
Yel- Maintenance Mode: Lit at distance or speed level 4 or higher.
LV4/76
low Normal Communications Mode: Lit when a Tag memory error occurs.
Yel- Maintenance Mode: Lit at distance or speed level 3 or higher.
LV3/72
low Normal Communications Mode: Lit when a no Tag error occurs.
Yel- Maintenance Mode: Lit at distance or speed level 2 or higher.
LV2/71
low Normal Communications Mode: Lit when a verification error occurs.
Yel- Maintenance Mode: Lit at distance or speed level 1 or higher.
LV1/70
low Normal Communications Mode: Lit when a Tag communications error occurs.
The distance level will vary greatly depending on the surrounding environment. The setting position will serve as a
guide, but use RUN mode to conduct a sufficient number of tests in the actual operating environment.
Values of distance level 4 or above may not be displayed, but this will not affect the RUN mode performance and does
not indicate a malfunction.
Antenna with Separate Amplifier connection port
RUN
LV6/7D
COMM
LV5/7A
NORM
LV4/76
ERR
LV3/72
LV2/71
LV1/70
Controller connector
Meaning
Section 2
Specifications and Performance
RFID System
31
User's Manual