Installing and connecting
5.4 Connection
5.4.5
Screwing on the cover
Requirements
CAUTION
Loss of degree of protection
Prior to closing the cover, check to ensure that:
• No dirt or cable residues are in the enclosure.
• The sealing surfaces are clean.
• The necessary cable glands are installed and screwed tightly in place.
• Unused openings are closed using the supplied screw plugs.
Loss of degree of protection
Degree of protection IP66 is only guaranteed if the device was installed perfectly.
Please note that if the device is open or not completely closed, this degree of protection is
no longer guaranteed.
Procedure
1. Place the cover and screw it on properly.
18
Such residues could lead to faults or short-circuits.
WARNING
SIWAREX JB stainless steel with ATEX certificate
Compact Operating Instructions, 06/2010, A5E01257284C-01