Table of Contents
Advertisement
Digital Tuner
Note: Memory Card /USB service availability varies with areas. Please understand if Memory Card
/USB service is not available in your area, the following service is not available, either.
Band selection
Press MODE button to select the RADIO mode.
Press the BAND button to select the desired band: FM1=> FM2 => FM3 => MW
STEREO/MONO
In FM mode, press SETREO/MONO button on remote control to select stereo or mono sound
reception.
LOC/DX
Press LOCAL button on remote control to select reception of local stations or DX for distance
stations.
Manual/ automatic tuning
Manual tuning: press the
seconds to enter the manual tuning mode. Press the
Remote repeatedly to select a station downward or upward step by step.
Automatic tuning: press the
buttons on front panel, the automatic search will start. It will play when finds the station.
Preset station 1-6 play and setting
Play preset station: to play the preset station 1-6, you can press number key 1-6 on remote
control, you can also press SEL button on front panel
Preset station setting: during manual turning or automatic tuning, press and hold the number
1-6 buttons on remote to store the preset station 1-6 or long press BAND button on front panel
and press +/- buttons and then press OK button to store.
Remark: You can store up to a total of 24 radio stations in the memory (18FM, 6MW).
AS (Auto Store) / PS (Preset Scan)
AS (Auto Store): I
panel and hold for 2 seconds to store radio station's with the best reception to the preset buttons
automatically.
PS (Preset Scan): In tuner mode, press this button to scan the preset memorized station, each
preset scan for 5 seconds. Press again to stop operation.
Memory Card/ USB Operations
USB Flash Memory
To play MP3/ MP4/ WMA files from a USB flash memory, insert a USB flash memory into the USB
port on the right side of the unit. The unit will start playing MP3/MP4/ WMA files on the USB flash
memory automatically. Or press the MODE button to select USB after pressing POWER button to
turn on the unit.
n tuner mode, press the RPT/P.SCN button on the remote or AS/PS button on front
buttons on remote control or on the panel and hold for 2
buttons on the Remote or press
Page - 12
buttons on the panel or on the
/
Advertisement
Table of Contents
