Set Analyzer Limits; Trend Setup - Fluke 438-II User Manual

Set Analyzer Limits

You can adjust the default limit values that show the system performance in various bar graphs. The limits
you enter here adjust where the bar graph shows the transition from orange to red. See Motor Analyzer
Parameters on page 8 for more information.
To change:
1. Use 
2. Press  to restore the default values.

Trend Setup

The Trend Setup screen is a simplified version of the normal TIMED START screen. Motor Analyzer has an
immediate start mode only and TIMED START is not available. To open the screen, go to Motor Setup
screen and press .
The top line is information about the available memory space (43X-series II standard feature).
You can adjust the duration of the TREND. Default is the global TREND duration as defined in the Function
Preferences Trend setup screen. The TREND resolution is fixed at 1s.
Softkeys:


to change a default value.
CHANGE NAME
BACK
Change the name of the data file (43X-series II standard
feature).
Go to the MOTOR SETUP screen.
Motor Analyzer
Motor Setup
7