Maintenance Schedule - Poulan Pro PP16H36RB Owner's Manual

MAINTENANCE
MAINTENANCE
SCHEDULE
Check Brake Operation
Check Tire Pressure
T Check Operator Presence & ROS Systems
_ Check for Loose Fasteners
ChecWReplace Mower Blades
_ Lubrication Chart
Check Battery Level
R
Clean Battery and Terminals
Check Transaxle Cooling
Check Mower Levelness
Check V-Belts
Check Enqine Oil Level
Change Engine Oil (with oil filter)
Change Engine Oil (without oil filter
_ Clean Air Filter
G Clean Air Screen
Inspect Muffler/Spark Arrester
N Replace Oil Filter (If equipped)
E Clean Engine Cooling
Fins
Replace Spark Plug
Replace Air Filter Paper Cartridge
__ RRe_place Fuel Filter
BEFORE
EACH
USE
(,
r,
EVERY
8
HOURS
r,
v"
EVERY
25
HOURS
V#'1,2
EVERY
5O
HOURS
v'
_#_1,2
EVERY
100
HOURS
i/'
v'
_,2
EVERY
SEASON
V
BEFORE
STORAGE
t,/
v'
v"
1,,,'
- Change more often when operating under a heavy load or
in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions.
3 - Replace blades more often when mowing in sandy soil.
4 - Not required if equipped with maintenance-free battery.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover items that have
been subjected to operator abuse or negligence. To receive
full value from the warranty, operator must maintain tractor
as instructed in this manual.
Some adjustments will need to be made periodically to
properly maintain your tractor.
At least once a season, check to see if you should make
any of the adjustments described in the Service and
Adjustments section of this manual.
• At least once a year you should replace the spark plug,
clean or replace air filter, and check blades and belts
for wear. A new spark plug and clean air filter assure
proper air-fuel mixture and help your engine run better
and last longer.
LUBRICATION CHART
d) SPINDLE d) SPINDLE ZERK
d) ONT WHEEL
BEARING ZERK -i BEARING ZERK
d) STEERING
SECTOR GEAR
TEETH
BEFORE EACH USE
• Check engine oil level.
• Check brake operation.
• Check tire pressure.
• Check operator presence and
ROS systems for proper operation.
• Check for loose fasteners.
_ GENERAL PURPOSE GREASE
_ REFER TO MAINTENANCE "ENGINE" SECTION
IMPORTANT: DO NOT OIL OR GREASETHE PIVOT POINTS
WHICH HAVE SPECIAL NYLON BEARINGS, VISCOUS
LUBRICANTS WILL ATTRACT DUST AND DIRT THAT WILL
SHORTENTHE LIFE OFTHE SELF-LUBRICATING BEARINGS.
IFYOU FEELTHEY MUST BE
LUBRICATED,
USE ONLYA
DRY,
POWDEREDGRAPHITE TYPE LUBRICANTSPARINGLY.
18